Home  |  About Us  |  Contact us  |  Services  |  Quality Policy  |  Environmental Policy
Rubber Conveyor Belts
Steel Cord Conveyor Belts
PVC Conveyor Belts
PVC Solid Woven Belts
V-Belts
Rubber Hoses
Sandwich Belts
Timing Belts
Flat Rubber Belts
Rubber Sheets
Conveyor Belt Fasteners
Belts Jointing Adhesive
Conveyor Belt Pulleys,     Rollers & idlers
DOWNLOAD
Company Profile
Technicals
Inches and Millimeters
Rubber Compound

Steel Cord Conveyor Belt

IBC Steel cord conveyor belts are widely used in high strength, long distance and heavy load transportation of materials, and they are also used in high strength and short distance transportation of materials on special occasions.

Width: Up to 2400mm

CHARACTERISTICS:
1. High tensile strength: The belts are suitable for large span, long distance transportation Of materials

steel cord conveyor belt 2. Small elongation in use: The belts need only a very short take-up stroke distance.

3. Small diameter of drive pulley: The belt body has a layer of longitudinally arranged Steel cords as its skeleton, and thus is resistant to flex fatigue. Therefore, drive pulley Of smaller diameter can be used to make the equipment smaller.

4. High adhesion between rubber and steel cord: The cords are coated with zinc on there Surface, and also the rubber used have the property of good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords and is resistant to shock and Difficult to drop, so the rubber belts are long in life.

5. Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel Cords are very evenly arranged and have the same tension, so the belts are well balanced in running and difficult to run awry.

6. Good trough ability: As the belt body has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping.

7. Inspection of the belt X-rays: Users can use X-rays to inspect damages of the skeleton Steel cords on the conveyor machines to prevent accidents from happening.

Adhesion of steel cord:

Strength

ST630

ST800

ST100

ST1250

ST1600

ST2000

Adhesion N/mm
(DIN22131-88)

60

70

80

95

105

105


Strength

ST2500

ST3150

ST3500

ST4000

ST4500

ST5000

ST5400

Adhesion N/mm
(DIN22131-88)

130

140

145

150

165

175

180


STEEL CORD/CABLE CONSTRUCTIONS

Steel cord

This is a 7x7 (7 strands of 7 wires) open type steel cord (or cable) with four different wire diameters.
The advantage of open type steel cords is the high rubberization of the cord gaps - for higher steel cord pull-out strength and better corrosion prevention.
The cable diameter is measured as per DIN 3051.

S Z Cord

In a steel cord conveyor belt, Z and S lay steel cords are used alternately to ensure a straight running behaviour of the belt.
The illustration shows a regular lay.
The lay length of the sheath is the length along the strand in order for a wire to make one complete revolution around the king wire.


Home  |  About Us  |  Contact us  |  Services  |  Quality Policy  |  Environmental Policy
Powered by www.kvisionindia.com